Introduction of C-Type Side-entry mixer：
Installing a side-entry mixer in the oil tank, is used for mixing oils or other medium and then reach the purpose of harmonization, heat transfer, homogenization and prevention of sediment accumulation. Using this equipment has many advantages, such as small investment, convenient operation, high efficiency, low power consumption, low static electricity generated in medium and guarantee product quality.
C-Type Side-entry mixer can be installed in petroleum tank, lubricating tank, fuel oil drum, paraffin tank, asphalt tank (for heavy rubber asphalt, basic petroleum bitumen, A Grade asphalt) and some storage tanks for additive and other medium which need to be stirred.
How to maintain the side-in mixer
First, the basis of the equipment is that it needs to have sufficient rigidity to ensure that there will be no resonance or sloshing. The maintenance part of the side-in type agitator mainly includes maintenance of the reducer, that is, it needs to be used and maintained according to the reducer.
Second, the blade has not been completely immersed in the liquid. It must not be operated by empty vehicles, so as not to cause danger or damage to the equipment. When the side-in type agitator is turned on, if it is found that the equipment has abnormal sound, temperature rise, shaking, etc., it needs to stop immediately to operate, and then check and process. If there is an abnormality, it needs to be dealt with immediately. Every place needs to be checked carefully to see if there is any abnormality.
Third, before starting the side-in type agitator, the basic bolts must be confirmed first, and each screw is completely fixed. In the case of high-speed or large-capacity agitation and operation, the bottom or middle of the shaft body needs to be installed with a positioning device to reduce the probability of failure caused by the shaft body shaking. It is very important to require the selection of the side-in type agitator according to different industries, working environments and mixing purposes. Improper selection makes it easy to shorten the use time of the side-in mixer and high failure rate.
Only by mastering the method of maintenance and use of the side-in type agitator can the normal operation of the side-in type agitator not affect the progress of the construction period. It also extends the life of the side-in mixer and reduces production costs.